Preparation & Painting Systems

Hot Water Pressure Cleaning

Before preparation and painting we use chemical free hot water pressure cleaning to remove all pollution, dirt, dust, mould, mildew, lichens, loose & flaky paint, and other surface contaminants, removing all loose and flaky paint which may affect the adhesion of the coating systems. These areas will then be allowed to dry.

Preparation

Render – Inspect for any surface defects, and where required, any visible defects will be filled with suitable materials to match building’s exterior structure.
Render Repair Process (Step by step gallery)

: Step 1

: Step 2

: Step 3

: Step 4

: Step 5

: Step 6

: Step 7

: Step 8

: Step 9

: Step 10

Metal – Any visible rusty or corroded areas will be sanded to ensure a solid surface for painting. If required, visible defect areas will be filled and sanded. Surface will be treated with a rust proof converter & 2 PAC (high performance maintenance coating suitable in areas prone to harsh weather conditions, salty air and extreme heat conditions).
Timber – Any visible rusty nails/screws will be treated with a rust proof converter, painted with 2 PAC and allowed to dry. If required, visible defect areas will be filled.

Painting

Application of a two or three-coat paint system; depending on the deterioration and condition of the building surface.

Spot prime (treat defect & bare areas) with waterproof membrane sealant primer coat (aids in adhesion to surfaces)
Undercoat to penetrate and seal the surface.
Topcoat of tough & durable ultra-premium exterior paint.

Click here for more information on the premium products we use.

Save